$5.42
This product is a digital blueprint and not a physical item.
Returns or refunds are not accepted.
The explorer's camera strap template provides the design of a prestigeous leather strap, made to withstand strong tension and ensure the safety of camera equipment. It is made of 2 parts of full grain cowhide leather stiched together. The end pieces are attached to the nylon webbing strap with a cross stich in 3 independent locations with a total stich length of 3.3cm.
The template includes two versions of the strap, i.e. a short and a long version.
The length of the strap end to end is approximately 57cm for the short version and 90cm for the long version. The width is 4cm.
Information and terms of use:
You can sell as many self crafted products of this pattern as you wish if you are a small leathercrafting business. Mass production of the product of this template is not allowed. Only crafting handmade products of this template is permitted.
The unauthorized reproduction or sale of this template is prohibited. All rights reserved.
If you post a product that you created using this template, it would be appreciated if you mention Silver Pine Leathercraft as the designer of this template.
You shall receive 2 files for the template, with paper format A4 and Letter.
Print out the pattern selecting the option “Actual size”
Recommended leather thickness 1.6mm - 1.8mm
Recommended thread: 0.8mm
Hole pitch: 5mm
Tools required:
1mm hole punch
Craft knife
Leathercraft glue
Hammer
Materials required:
Nylon webbing with width 10mm or 15mm
2 pieces plastic tri-glide for the nylon webbing
Vegetable tanned leather of approx 0.13 sqm for the longer version, 0.09 sqm for the shorter version.
0.8mm waxed thread
Dimensions of finished product:
Long version:
896 mm (length) x 40 mm (width) x 3.6 mm (thickness)
Short version
566 mm (length) x 40mm (width) x 3.6 mm (thickness)